Power Tools
Showing 141–160 of 409 results
-
Power Tools
Grinder Angle 9“ makita
The Makita GA9050 Angle Grinders are developed as easy-to-control 2000W class angle grinders, featuring compact and lightweight tool design achieved by employing the recently developed, compact and lightweight motor (Type S-82). Includes down-sized gear housing and main handle compared to its predecessor.
SKU: GA9050 -
Power Tools
Grinder 7 Low Rev Angle Makita
The Makita 7 in. Angle Grinder is built around a powerful 15 amp motor that delivers up to 6, 600 RPM for fast stock removal. It features labyrinthine construction that helps seal Internal components from outside contaminants to help increase tool life. The easy-to-use large trigger switch locks on for extended operation, and a large shaft Lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. At 7 in. Grinding wheel is included.
SKU: GA7021 -
Power Tools
Switch Pressure Washer 40/60psi Square D
The Pumptrol FSG2J24BP electromechanical pressure switch by Square D is the most trusted brand in residential, commercial and industrial pumping applications. The FSG2J24BP has a 40 psi to 60 psi pressure setting range activates an electrically driven water pump within a power circuit when the adjustable rising and falling thresholds are reached. The NEMA 1 enclosure has a 1/4 in. NPSF internal fluid connection and screw clamp terminals. The switch works with a 1.5 HP or less pump. The adjustable differential range is 15 psi to 30 psi and the cut-out range is 20 psi to 65 psi. The enclosure is National Electrical Manufacturers Association (NEMA) Type 1 and Ingress Protection (IP) 20 rated. The switch is Underwriters Laboratory (UL) Listed and Canadian Standards Association (CSA) Certified. For over 75 years, Square D pressure switches continue to meet the needs of our customers. Square D Pumptrol pressure switches are manufactured by Schneider Electric.
SKU: FSG2J24CP -
Power Tools
Drill-1/2 7A 600RPM Makita
Product Description
The Makita 1/2 in. drill (model DP4002) has a powerful 7.0 Amp motor for heavy duty industrial performance and a variable speed (0700 RPM) for drilling in a wide variety of materials. It is ergonomically designed with rubberized grips for comfortable operation and has a side handle that rotates 360 degrees for increased versatility. The DP4002 includes a large trigger switch that is conveniently located and a retractable belt clip allows operation in tight areas.
From the Manufacturer
This 1/2-inch, reversing drill from Makita features a powerful 8-amp motor for heavy-duty industrial performance along with variable speed (0-600 rpm) for drilling into a wide variety of materials. The retractable belt clip allows operation in tight areas and the lightweight cast-aluminum gear housing is very durable. Its reversing switch is conveniently located above the trigger, the side handle rotates 360 degrees, and the ergonomically designed rubber grips give positive control. This double-insulated drill also features an all ball and needle bearing construction for longer tool life. Easily accessible brushes mean quicker maintenance. Your purchase includes a drill chuck and chuck key.
SKU: 088381036474 -
Power Tools
Drill-Hammer 1/2 18v LTX Makita
Features include 4 pole motor – delivers high power to weight ratio, Conveniently located push button for forward and reverse, High comfort handle – ribbed rubber grips enable all finger tips to hold handle securely, 2 speed metal gearbox – ensures high transmission durability, Forward/reverse rotation, Variable speed trigger, Electronic brake and LED Job light – with afterglow function. Light can be turned on before tool starts by pulling trigger slightly. 22 minute charge time – air cooled Makstar Optimum Charging System.
SKU: DHP456SP1N -
Power Tools
Bit Set 18 PCS Drill Makita
Get the right bits for your driver-drill or hammer driver-drill. The 18 Pc. Assorted Drill Bit Set (D-59178) offers an assortment of straight shank bits for use in metal, wood, and masonry materials. The metal drilling bits are made of HSS-G for longer life with a 135-degree split-point geometry for fast starts and reduced “walking”. The brad point wood drill bits are engineered for clean, straight holes in wood, and the masonry hammer drill bits can be used in most hammer drills for use in brick, block, and concrete. The straight shank bits are for use with most corded and cordless 3/8” and ½” drills (drills sold separately).
SKU: 088381469746 -
Power Tools
Disc-Flap 4-1/2 Makita
Part of the larger Z40 & Z180 Makita Flap Disc family, this Z120 Flap Disc is ideal for cleaning and finishing. For more aggressive stock removal, we recommend the Z40 while the Z80 is ideal for Balanced Material Rust Removal / Blending & Finishing. All of these Makita Flap Discs are constructed with Zirconia alumina (Z), which is ideal for Stainless Steel & Metal Applications, while working well with Non-Ferrous applications. Z120 Super Fine Angled Flaps are ideal for Finishing, Polishing & Conditioning, allowing you to do so on contoured, edge metal work surfaces at comfortable working angles. The Angled Design allows for 90% of the abrasive material to be in contact with work surface, yielding maximal grinding surface area for greater ease, effectiveness and speed. Makita uses Fiber Glass backing plates to help absorb vibration and are consumed during use without damaging the material. Specific suited applications include: Weld head blending, remove weld slag, deburring, edge blending, surface conditioning and metal fabrication.
SKU: 088381445351 -
Power Tools
Disc-Flap 4-1/2 Makita
Flap (Multi) discs provide superior material removal and blending performance with greater ease of use and functionality versus depressed center grinding wheels and resin fibre discs.
Makita 4-1/2″” Abrasive Multi-Disc is designed to work with Angle Grinders for material removal and surface preparation. The Zirconium abrasive grain runs cooler and lasts longer than aluminium oxide. These wheels work on a variety of materials including metal; wood and plastic.SKU: 088381445337 -
Power Tools
Saw Blade 7 1/4“ 24 tooth Carbide Makita
The Makita® 7-1/4″ Framing Blade (D-45989) is ideal for use in most general construction cutting applications. It quickly cuts through rough framing lumber, plywood, OSB, and engineered lumber. The ATAF (Alternate Top Alternate Face) tooth design and expertly tensioned plate make for precise cuts. Ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss.
SKU: 088381411462
